Hot Stick Technology

The hot stick is currently used to heat all spa models offered. This state of the art technology is the newest energy efficient way to heat your spa. The hot stick heats the water through friction, a physics technique. Small amounts of water are being forced through the hot stick at a high rate of speed. In doing this the water molecules are forced to collide which creates friction, kinetic energy and heat. Once the water passes through these "hot valves," the water meets in an open chamber where a vortex is created. This vortex causes the water to rotate in the chamber at a very high rate of speed. This swirling, whirlpool action is again creating kinetic energy, friction and heat. The water heats at 1.9 degrees per hour. The best way to describe this friction process is to put your hands together as if going to pray, rubbing them back and forth. Why did your hands get hot? Friction!. The hot stick is creating the same type of friction, using practically zero electricity in do so. Another important part is that the spas offered do not have the normal problems that a typical spa heating element brings. Ask any spa dealer in America what the first part on a spa to break is - the heating element, because the chemicals and water corrode the coil and it breaks. There is NOTHING to break on our heating systems. Also because of this energy efficient system, your electricity bill will be lower than any other spa on the market.